Gas treatment equipment for plastic granulating line environment is life, green mountains are oxygen, blue sky is health. Industrial waste gas treatment equipment is a kind of professional equipment for the treatment of waste gas. Industrial waste gas causes great pollution to the environment, and also affects people's healthy life. VOC organic waste gas produced in industrial production and carbon monoxide, sulfur dioxide, hydrocarbons and other harmful substances to human body are strong carcinogens. Therefore, the problem of industrial waste gas treatment has received more attention and support from government departments. It is reported that in the process of industrial production of a large number of emissions and carbon monoxide, sulfur dioxide and hydrocarbons harmful substances including VOC organic emissions is a strong carcinogen. In contrast, the traditional treatment method only releases the waste gas generated at the working point through the upper air, but such operation only transfers the pollution to the atmosphere and the surrounding environment, resulting in greater pollution and damage.
The left side of the industrial waste gas treatment equipment is the direction of the air inlet, and the temperature of the waste gas is controlled below 60°C or so. Because the temperature is too high will affect the purification effect and the service life of the equipment. The purifier is installed in front of the fan, and the front end of the purifier is equipped with paint paper to degrade large particles in the organic waste gas, so as to ensure the internal cleanliness and service life of the purifier and extend the maintenance time. If the purifier is installed on the bracket, it should be firmly connected with the bracket. The connection between the purifier and the exhaust pipe must be sealed; The purifier can be installed indoors or outdoors, but there should be enough space for maintenance and repair. The equipment is maintained and cleaned regularly according to the usage. The purifier box should be reliably grounded; It is not allowed to bump against the uv tube during the installation process, and foreign matters are not allowed to fall into the purifier. The connection between the purifier body and the electric control box should be reliable and correct.
Gas treatment equipment for plastic granulating line Chosen is high pressure low temperature plasma discharge, electric adsorption harmful toxic gases on the smoke board, under the effect of superposition pulse open molecular bonds, the free base, release ozone activation, through chemical reaction, comfortable touch, carbon dioxide and water, harmless to the human body, also before and after the equipment set up all kinds of filter materials, for different exhaust device, ensure full thorough purification effect. For the waste smoke from welding and soldering factory, VOC, formaldehyde and toluene harmful waste gas from paint, plating and baking paint, peculiar smell gas from rubber and plastic production, all kinds of industrial waste gas treatment equipment from chemical industry and pharmacy can be purified and removed.