Paper mill waste gas treatment equipment should pay attention to the process

Along with the national high attention to environmental protection, the implementation of national environmental policy. In recent years, a series of relevant policies and regulations have been issued. Across the country, although environmental protection regulations vary from place to place and the pace of implementation is inconsistent, it can be seen that the upgrading of the manufacturing industry is urgent; For the company, must constantly improve the technology, to maintain the upgrading of industrial structure.

Paper mill waste gas treatment equipment refers to the manufacturing sites such as processing plants, production workshops caused by the organic waste gas in the opening to the outside world before the implementation of preparatory treatment, in order to achieve the national organic waste gas opening to the outside world in the specification of the work.

Generally, exhaust gas treatment in dongguan includes industrial exhaust gas treatment, smoke exhaust gas treatment, strong acid and alkali exhaust gas treatment, odor exhaust gas treatment and gas disinfection and sterilization cleaning. The exhaust gas treatment vapors in dongguan actually contain toluene, butanone, butanol, industrial methanol, indoor formaldehyde, benzene, xylene, xylene and butadiene

Characteristics of exhaust gas treatment: exhaust gas purification equipment output power is very large, exhaust air volume is very large, the actual effect is good. Dongguan city waste gas treatment to different types of civil site air filtration.

1. During the whole process of application, the concentration of strong acid and strong alkali in the digestive absorption solution should be checked immediately. When the concentration of acid and alkali is found to be too high, the digestive absorption solution should be immediately removed and replaced.

2. The surrounding area of waste gas purification equipment shall be kept clean and tidy.

3. When the machine and equipment stop working, stop the blower motor for 1-2 minutes first, then stop the circulating pump. When the application should first open the circulation pump 2-3 minutes, and then open the blower motor.

4. The digestion and absorption liquid in the purification tower is added according to the development of the refueling tank and the level of the liquid level gauge and the inlet port. After the operation of the machine and equipment, some liquid will enter into the respiratory system at this time. During the whole process of application, the state of application of digestible absorbents should be observed. When large amounts of digestible absorbents are found to be consumed, they should be checked every 8 hours and added immediately when they are in short supply.

5. often need to check whether the desulphurization tower is blocked, if the block should be immediately cleared, or the tower body to carry out cleaning.