Gas treatment equipment for plastic granulating line what you should pay attention to in the process

       Along with the national high attention to environmental protection, the implementation of national environmental policy. In recent years, a series of relevant policies and regulations have been issued. Across the country, although environmental protection regulations vary from place to place and the pace of implementation is inconsistent, it can be seen that the upgrading of the manufacturing industry is urgent; For the company, must constantly improve the technology, to maintain the upgrading of industrial structure.

Waste gas management refers to the industrial production sites such as processing plants, production workshops caused by the organic waste gas in the open to the outside world before the implementation of preparatory treatment, in order to achieve the national organic waste gas open to the outside world in the work of the standards.

General waste gas treatment includes industrial waste gas treatment, smoke waste gas treatment, strong acid and alkali waste gas treatment, odor waste gas treatment and gas disinfection and sterilization cleaning. The exhaust gas treatment vapor actually contains toluene, butanone, butanol, industrial methanol, indoor formaldehyde, benzene, xylene, xylene, butadiene

Characteristics of granulator waste gas treatment equipment: waste gas purification equipment output power is large, large exhaust air volume, the actual effect is good. Exhaust gas treatment to different civil site air filtration.

1. During the whole process of application, the concentration of strong acid and strong alkali in the digestive absorption solution should be checked immediately. When the concentration of acid and alkali is found to be too high, the digestive absorption solution should be immediately removed and replaced.

2. The surrounding area of waste gas purification equipment shall be kept clean and tidy.

     3. When the machine and equipment stop working, stop the blower motor for 1-2 minutes first, then stop the circulating pump. When the application should first open the circulation pump 2-3 minutes, and then open the blower motor.

4. The digestion and absorption liquid in the purification tower is added according to the development of the refueling tank and the level of the liquid level gauge and the inlet port. After the operation of the machine and equipment, some liquid will enter into the respiratory system at this time. During the whole process of application, the state of application of digestible absorbents should be observed. When large amounts of digestible absorbents are found to be consumed, they should be checked every 8 hours and added immediately when they are in short supply.

5. often need to check whether the desulphurization tower is blocked, if the block should be immediately cleared, or the tower body to carry out cleaning.

Around that is to say, the whole process of dongguan city waste gas treatment must pay attention to the point, so you want to know the details of other environmental protection goods? Care network, accompany you to follow the country's new policy not to explode thunder!