What matters should pay attention to when using the organic waste gas treatment equipment?

 Organic waste gas treatment equipment, mainly by using different technology, by recycling or removing the harmful components of reducing emissions, to protect the environment, to purify the air is an environmental protection equipment. Any mechanical equipment needs to be timely and correct use and maintenance, the following cool air environmental protection said sewage plant organic waste gas treatment equipment to pay attention to the use of what matters.

1. After the operation and delivery of the organic waste gas treatment equipment, the user shall send someone to keep the equipment and conduct regular inspection. If abnormal sound or water leakage is found, the equipment shall be stopped and repaired before use.

2. The organic waste gas treatment equipment shall be installed outdoors, and the water-pump fan motor shall be made into a rainproof cover to allow the motor to get damp. No matter whether the exhaust gas purification treatment equipment is installed indoors or outdoors, such as the selection of fiberglass or plastic fan, must install a protective cover, in case of screw looseness, bearing damage or suction debris, damaged impeller sometimes injured personnel, resulting in an accident.

3. Replacement and matching of waste gas purification liquid: the formula ratio of purification absorption liquid is determined by the low concentration of different gas sources of the user's unit, which will be provided to the user management personnel after the equipment is tested and accepted.

4. Before the use of the organic waste gas treatment equipment, check whether the pipelines and valves of each system of the equipment are in good condition, and whether the absorption liquid reagent is selected and proportioned correctly. If the absorption liquid of the manufacturer of the printing machine waste gas treatment equipment fails to meet the specified requirements, it shall be timely supplemented. Start the water pump for 3-5 minutes before starting the fan. When the purification system is shut down, the fan should be shut down for 2-3 minutes before the water pump is shut down. It should not be opened randomly, otherwise the motor will be burnt out and the packing will be blocked, which will affect the purification effect.

Spray paint waste gas treatment equipment method:

First: photocatalyst purification: organic waste gas is converted into CO2 and H20 at room temperature under the action of the catalyst. Effectively remove benzene, ester, ketone, non - methane total hydrocarbon, VOC and other organic waste gas. Low cost, no hidden trouble, no secondary pollution.

Second: plant spray effect: the use of spray tower effect to remove paint residue, paint fog in the spray exhaust gas, the use of plant liquid washing can reduce the viscosity of paint residue, paint fog, spray washing tower on the removal of paint residue, paint fog efficiency.

Application scope of paint waste gas treatment equipment:

Paint waste gas treatment equipment is widely used in machinery, electrical equipment, home appliances, automobiles, ships, furniture and other industries. Paint raw materials - coatings are composed of non-volatile and volatile components, including film forming materials and auxiliary film forming materials, volatile components refer to solvents and diluents (mainly xylene).