The characteristics and principles of industrial waste gas treatment equipment are introduced

As home to this is to pay more and more attention to environmental protection, industrial waste gas discharged as long as you're there has to be your installation of industrial waste gas treatment equipment, installed it to have the potential of industrial waste gas treatment equipment, like which with poor quality and substandard industrial waste gas treatment equipment can't to do it, even if you get the outside is very good-looking, your gas from industrial waste gas treatment equipment is not up to standard or not.

1. Low operating cost: the equipment has no mechanical action, no noise, no need for human management and daily maintenance, and only needs regular inspection. The energy consumption of the equipment is low (only about 0.2 degree of electricity is consumed per 1000 m3 / h of treatment).

2. No pre-treatment: industrial waste gas does not need special pre-treatment, such as heating and humidification, etc. The equipment can work normally at operating environment temperature between -30℃ and 95℃, humidity between 30-98 ℃ and PH between 3-11 ℃.

3. Effective removal of waste gas: it can effectively remove volatile organic compounds (vocs), inorganic substances, hydrogen sulfide, ammonia, thiols and other major pollutants, as well as a variety of odor. The purification and deodorization efficiency can reach above 99, and the purification and deodorization effect greatly exceeds the emission standard of odor pollutants issued by the state council in 1993 (gb14554-93).

4. No substances need to be added: only the corresponding exhaust pipes and exhaust power need to be set so that the industrial waste gas can be decomposed and purified by this equipment, and the waste gas treatment equipment manufacturers of paper mills need not add any substances to participate in the chemical reaction.

5. industrial waste gas treatment equipment to choose the quality of mouth material manufacturing: German UV light tube warranty 12,000 hours, fire, corrosion resistance, stable performance, long service life.

6. environmental technology products: adopt international technology concept, first through the house and my company engineering and technical personnel long-term repeated test, the development, has the independent intellectual property rights of science and technology, environmental purification products can be thoroughly decompose toxic and harmful substances in industrial waste gas, and can achieve the purification of the perfect effect, the decomposition of UV light tubes for the cool wind environmental protection equipment co., LTD., the unique "seven catalytic coating technology" after gas, can achieve the harmless emissions, do not produce secondary pollution, at the same time to achieve effective disinfection sterilization effect.

1. Plasma reaction method:

Plasma containing energy active group is used to decompose waste gas molecules to produce carbon dioxide, water and paper mill waste gas treatment equipment so as to achieve the purpose of purifying waste gas. However, this method is not suitable for flammable and explosive paint organic waste gas treatment, there are hidden dangers, and the later maintenance of equipment is more complex.

2. Catalytic combustion method:

Under the action of the catalyst, the hydrocarbons in the organic waste gas are rapidly oxidized into water and carbon dioxide at a lower temperature to achieve the purpose of treatment. However, it is used for the low concentration waste gas with large air volume, the cost is higher and the operating cost is higher.

3. Condensation method:

After direct condensation or adsorption condensation of paint waste gas treatment, recovery of condensate by separation and value of organic matter. This method is used for concentration, low temperature and low air volume. But the investment is large, energy consumption, operating costs, generally do not use this method to purify paint waste gas.