What is the importance of organic waste gas treatment?

 In recent years, more efforts have been made to treat organic waste gases, and the limit values for volatile organic waste gases have been significantly tightened. Limits set by regulators must be followed when measuring emissions. Limits on concentrations of organic waste gas treatment have been lowered, and some substances, such as dichloromethane, have been reclassified. The general rules for the content of organic waste matter in the exhaust are: the concentration must not exceed 50mg carbon /m3, or the material flow must not exceed 0.5kg carbon /h. Many production enterprises need to make new investment in waste gas purification and environmental protection.

For users and producers of organic solvents, of course, the search for suitable processes to treat organic waste gas to the desired value is presented. The need to recycle organic solvents must be decided first. In this regard, economic considerations will be the basis, taking into account the value of the organic solvent, the concentration of the organic solvent, the volume flow of the exhaust, the cost of treating the mixture that will occur under certain circumstances, and many other factors.

1: start with prevention

In order to prevent the equipment function and precision from falling to the specified critical value or reducing the failure rate, the repair activities carried out according to the pre-established plans and technical requirements are called preventive maintenance of equipment. The most commonly used preventive maintenance methods are status detection maintenance and regular maintenance.

2: start from actual technical state next

State detection of organic waste gas treatment equipment repair is actual technology state of additional preventive maintenance way, granulating waste gas treatment equipment manufacturers are generally for equipment daily check and regular inspection to find out technical state, in view of the degree of degradation and equipment, before failure, timely preventive maintenance, troubleshooting hidden dangers and restore the function of equipment precision.

3: start from the equipment time

For organic waste gas treatment equipment to do maintenance on a regular basis which is a way of preventive maintenance from the equipment running time, granulating waste gas treatment equipment has the characteristics of line of equipment periodic maintenance, according to the waste gas treatment equipment, the use of wear rules beforehand determine the type of repair, maintenance interval, maintenance content and technical requirements, etc. The maintenance schedule can be arranged over a longer period of time according to the planned operating hours of the waste gas treatment equipment.

For businesses that use only toluene, the decision to treat organic waste is simple. In this case, the cost of the recovery unit can be quickly reimbursed. Although in principle other suitable recycling processes, such as condensation, absorption, or septal processes, can be considered, plant liquid-gas chemical reactions have in recent years been considered to be economical and safe.